对交换机的描述，正确的是（）

【名词&注释】

可靠性(reliability)、交换机(switch)、子网掩码(subnet mask)

[单选题]对交换机的描述，正确的是（）

A. 单广播域，单冲突域的设备
B. 单广播域，多冲突域的设备
C. 多广播域，单冲突域的设备
D. 多广播域，多冲突域的设备

查看答案&解析查看所有试题

学习资料：

[多选题]默认情况下，IGRP衡量路径好坏时，考虑的因素为（）

A. 带宽
B. 可靠性
C. 最大传输单元
D. 延时

[多选题]对于IP为199.41.27.0，子网掩码为255.255.255.240，则该IP地址和子网掩码相作用会得到一系列IP，从下列选项中选出属于“有效IP”的选项：()

A. 199.141.27.33
B. 199.141.27.112
C. 199.141.27.119
D. 199.141.27.126
E. 199.141.27.175
F. F.199.141.27.208

[多选题]The LAN needs are expanding at the Ezonexam corporate office, which is quickly growing. You are instructed to enlarge the area covered by a single LAN segment on the Ezonexam network.Which of the following are layer 1 devices that you can use? (Choose all that apply.)

A. A switch
B. A router
C. A network adapter card
D. A hub
E. A repeater

[多选题]As a Ezonexam trainee you are required to set the default gateway on a Cisco switch to the IP address of 192.168.1.115. Which IOS command should you use?

A. TestKSwitch(config) ip route-default 192.168.1.115
B. TestKSwitch(config) ip default-gateway 192.168.1.115
C. TestKSwitch(config) ip route 192.168.1.115 0.0.0.0
D. TestKSwitch(config) ip default-network 192.168.1.115
E. None of the above

[单选题]After working all night and successfully configuring a Cisco router for the Ezonexam network you save your changes on the startup config, reboot the router, and go out for a cigarette. When you return, none of your changes are active and the router boots to the initial configuration mode! Which of the choices below indicates the source of your problem?

A. Hardware failure in NVRAM prevents the router from loading the config
B. Startup-config in flash is corrupt and cannot be analyzed
C. Router configuration-register set to bypass startup configuration
D. Startup-config in NVRAM is corrupt and cannot be analyzed
E. None of the above

[多选题]Regarding the extended ping command; which of the statements below are true?(Select all valid answer choices)

A. The extended ping command is supported from user EXEC mode.
B. The extended ping command is available from privileged EXEC mode.
C. With the extended ping command you can specify the TCP and UDP port to be pinged.
D. With the extended ping command you can specify the timeout value.
E. With the extended ping command you can specify the datagram size.

[单选题]Study the Exhibit below carefully:London#show vtp

A. VTP Version: 2
B. Configuration Revision: 0
C. Maximum VLANs supported locally: 64
D. Number of existing VLANs: 5
E. VTP Operating Mode: Client
F. VTP Domain Name: London
G. VTP Pruning Mode: Disabled
H. VTP V2 Mode: Disabled
I. VTP Traps Generation: Disabled
J. Based on the information given above, what is the VTP function of this particular switch?
K. Learn and save VTP configuration in the running configuration.
L. Create and change VLANs.
M. Forwards information about VTP configuration.
N. VTP is disabled on this device.
O. VTP is not saved to NVRAM.

[单选题]You have a class C network, and you need to design it for 5 usable subnets with each subnet handling a minimum of 18 hosts each. Which of the following network masks should you use?

A. 225.225.224.0.
B. 225.225.240.0.
C. 225.225.255.0.
D. 255.255.255.224
E. 225.225.255.240

本文链接：https://www.51ksbd.net/show/4e5g40.html