【导读】
布丁学网发布2022计算机类考试思科认证模拟考试练习题228,更多思科认证的模拟考试请访问布丁学网计算机类考试频道。
1. [单选题]下列哪个network命令会告知此路由器开始使用IP地址为10.1.1.1、10.1.100.1和10.1.120.1的接口上的OSPF()
A. network 10.0.0.0 255.0.0.0 area 0
B. network 10.0.0.0 0.255.255.255 area 0
C. network 10.0.0.1 0.0.0.255 area 0
D. network 10.0.0.1 0.0.255.255 area 0
2. [单选题]在OSI七层模型中,介质工作在哪一层()
A. 传输层
B. 会话层
C. 物理层
D. 应用层
3. [单选题]备份路由器IOS的命令是:()
A. copy flash tftp
B. copy running-configt ftp
C. copy IOS tftp
D. copy startup-configt ftp
4. [多选题]对于IP为199.41.27.0,子网掩码为255.255.255.240,则该IP地址和子网掩码相作用会得到一系列IP,从下列选项中选出属于“有效IP”的选项:()
A. 199.141.27.33
B. 199.141.27.112
C. 199.141.27.119
D. 199.141.27.126
E. 199.141.27.175
F. F.199.141.27.208
5. [单选题]路由器“特权模式”的提示符是:()
A. >
B.
C. (config)
D. (config-if)
6. [单选题]路由器上,设置端口速率的命令是()
A. clock rate
B. bandwidth
C. set
D. encap
7. [单选题]下列命令中,无法正确执行的是()
A. Router(config)show run
B. Routerping 127.0.0.1
C. Router(config)hostname cisco
D. Routerreload
8. [单选题]You are a senior network administrator at Ezonexam, and while performing the password recovery procedure on your 2500 series Cisco router, you type in the following command:o/r 0x2142
A. What is the purpose of this command?
B. It is used to restart the router.
C. It is used to bypass the configuration in NVRAM.
D. It is used to enter ROM Monitor mode.
E. It is used to view the lost password.
F. It is used to save the changes to the configuration.
9. [单选题]The 201.145.32.0 network is subnetted using a /26 mask. How many networks and IP hosts per network exists using this subnet mask?
A. 4 networks and 64 hosts
B. 64 networks and 4 hosts
C. 4 networks and 62 hosts
D. 62 networks and 2 hosts
E. 6 network and 30 hosts
10. [多选题]There are 2 switches in the Ezonexam LAN, with no routers. Ports 1, 2 & 3 are assigned to VLAN 1 in switch 1 and 2 and ports 4, 5 & 6 are assigned to VLAN 2 in both switches. These two switches are connected together via a trunked link. Which of the conditions below would verify trunk and VLAN operation? (Select all valid answers)
A. Host 1 on VLAN 1 can ping Host 2 on VLAN 1
B. Host 1 on VLAN 1 can ping Host 4 on VLAN 2
C. Host 1 on VLAN 1 can not ping Host 2 on VLAN 1
D. Host 4 on VLAN 2 can not ping Host 1 on VLAN 1
E. Host 4 on VLAN 2 can ping Host 2 on VLAN 2