The LAN needs are expanding at the Ezonexam corporate office

【名词&注释】

路由器(router)

[多选题]The LAN needs are expanding at the Ezonexam corporate office, which is quickly growing. You are instructed to enlarge the area covered by a single LAN segment on the Ezonexam network.Which of the following are layer 1 devices that you can use? (Choose all that apply.)

A. A switch
B. A router
C. A network adapter card
D. A hub
E. A repeater

查看答案&解析查看所有试题

学习资料：

[单选题]Which command on router EzonexamA will assign the last usable IP address from the 192.168.32.128/28 subnetwork to a router interface?

A. EzonexamA(config-if) ip address 192.168.32.142 255.255.255.240
B. EzonexamA(config-if) ip address 192.168.32.143 255.255.255.240
C. EzonexamA(config-if) ip address 192.168.32.158 255.255.255.240
D. EzonexamA(config-if) ip address 192.168.32.145 255.255.255.240
E. EzonexamA(config-if) ip address 192.168.32.144 255.255.255.240
F. F. EzonexamA(config-if) ip address 192.168.32.158 255.255.255.240
G. G. None of the above

[单选题]路由器“路由模式”的提示符号是（）

B. (config)
C. (config-if)
D. (config-router)

[单选题]How can a Ezonexam administrator determine if a router has been configured when it is first powered up?

A. A configured router prompts for a password
B. A configured router goes to the privileged mode prompt
C. An un configured router goes into the setup dialog
D. An un configured router goes to the enable mode prompt

[多选题]There are 2 switches in the Ezonexam LAN, with no routers. Ports 1, 2 & 3 are assigned to VLAN 1 in switch 1 and 2 and ports 4, 5 & 6 are assigned to VLAN 2 in both switches. These two switches are connected together via a trunked link. Which of the conditions below would verify trunk and VLAN operation? (Select all valid answers)

A. Host 1 on VLAN 1 can ping Host 2 on VLAN 1
B. Host 1 on VLAN 1 can ping Host 4 on VLAN 2
C. Host 1 on VLAN 1 can not ping Host 2 on VLAN 1
D. Host 4 on VLAN 2 can not ping Host 1 on VLAN 1
E. Host 4 on VLAN 2 can ping Host 2 on VLAN 2

[单选题]Which type of cable should be used to make a connection between the Fa0/0 port on a router and the Fa0/0 port switch?

A. Rollover cable
B. Console cable
C. Crossover cable
D. Straight-through cable
E. Serial cable

本文链接：https://www.51ksbd.net/show/gkrpon.html