微软认证2022免费模拟考试题302

1. [单选题]You are the administrator of a Windows NT 4.0 Terminal Server Edition computer. The server has one hard disk, which is divided into two partitions The first partition contains the Windows NT 4.0 system files and is formatted as FAT. The second partition contains application data and user data. This second partition is formatted as NTFS. The server currently has Service Pack 3 installed.You need to upgrade the server to Windows 2000 Server. You want to ensure that no application data or user data is lost during the upgrade. You also want to perform. the minimum number of steps necessary to complete the upgrade.

A. What should you do? (Choose all that apply)
B. Convert the system partition to NTFS.
C. Install service pack4 or later on the server.
D. Use a Windows 2000 Server CD to start the server. In setup, select the option to upgrade.
E. Replace the Terminal Server installation with a standard Windows NT server 4.0 installation.

2. [单选题]You are the administrator of your company's network. A user named Paul in the service department has a Windows 2000 Professional computer. Paul needs to access the files that are in a shared folder on his computer. A local group named Sales has permissions to access the data. Paul is a member of the Sales local group but he cannot access the file he needs.What should you do?

A. Grant Paul NTFS permission so that he can access any parent folder to files in the shared folder.
B. Share the Sales folder and grant Paul shared folder permission to access the shared Sales folder.
C. Remove Paul from any other group that has been explicitly denied access to the Sales folder.
D. Delete the Sales local group and recreate it. Add individual user accounts from the Sales department back into Sales local group.

3. [单选题]You are the network administrator for Ezonexam.com. Your computer has a CD-ROM drive attached to a SCSI adapter. You plan to upgrade your computer from Windows NT Workstation 4.0 to Windows 2000 Professional. You determine that the SCSI adapter is not included on the current Hardware Compatibility List (HCL) and that the original SCSI drivers that you used for Windows NT are not compatible with Windows 2000 Professional.You want to upgrade your computer to Windows 2000 Professional.

A. What should you do?
B. Replace the SCSI adapter card with a Windows 2000 Professional compatible SCSI adapter. Start the installation from the Windows 2000 Professional CD-ROM. Add the new adapter card drivers when you are prompted.
C. Obtain Windows 2000 drivers from the SCSI adapter manufacturer. Copy the drivers to C:\Winnt folder. Start the installation from the Windows 2000 Professional CD-ROM.
D. Obtain Windows 2000 drivers from the SCSI adapter manufacturer. Start the installation by using the Windows 2000 Professional CD-ROM. Add the new adapter card drivers when you are prompted.
E. Modify Config.sys to use your existing SCSI adapter and existing CD-ROM drive. Using Windows NT 4.0, start the installation by running Winnt32.exe from the I386 folder on the Windows 2000 Professional CD-ROM.

4. [多选题]You need to install Windows 2000 Server on one of your older Windows NT Server 4.0 computers. The server has dual processors, 2 GB of RAM, a RAID controller with five SCSI hard disks in an array, and a generic 10/100-MB network adapter. You begin the server installation by updating the SCSI firmware.You then start the installation of the Windows 2000 Server operating system. During the next portion of the installation, you receive an error message indicating that no hard disks can be found.

A. You want to successfully install Windows 2000 Server on the computer.
B. What should you do? (Each correct answer presents part of the solution. Choose two)
C. Restart the installation by using the Windows 2000 Installation CD-ROM. Press F3 during the text-mode setup.
D. Restart the installation by using the Windows 2000 Installation CD-ROM. Press F6 during the text-mode setup.
E. Restart the installation by using a MS-DOS boot disk with a CD-ROM driver.
F. Insert a disk with the original SCSI firmware.
G. Insert a disk with the OEM SCSI driver.

5. [单选题]You want to configure a multiboot system with Windows NT Workstation and Windows 2000 Professional.What should you do?

A. When installing Windows 2000 Professional run chkdisk in Windows NT Workstation.
B. Disable the disk compression in Windows NT Workstation.
C. Install service pack four or later in Windows NT Workstation.
D. Install the distributed file system client on the Windows NT Workstation.

6. [单选题]You want to upgrade a Windows NT Server 4.0 computer to Windows 2000 Server. The system partition uses the FAT file system.You start the Setup program by starting the computer from the Windows 2000 Server CD-ROM.

A. However, you receive the following error message, "You chose to install Windows 2000 on a partition that contains another operating system. Installing Windows 2000 on this partition might cause the operating system to function improperly".
B. You are unable to perform. the upgrade. What should you do to resolve the problem?
C. Convert the system partition to NTFS.
D. Disable Advanced Configuration and Power Interface (ACPI) support for the computer.
E. Restart the computer, and then run Winnt32.exe from the Windows NT Server 4.0 environment.
F. Remove the Windows 2000 Server CD-ROM and restart the computer by using the setup floppy disks.

查看答案&解析查看所有试题

本文链接：https://www.51ksbd.net/show/k04zzd.html