[单选题]You are the administrator of a Windows 2000 network. Your network includes 75 Windows NT Workstation 4.0 computers. You are adding 50 new PXE-compliant computers to the network. The hardware on each computer is configured identically.You are using a RIS image to deploy Windows 2000 Professional to the 50 computers. You successfully install Windows 2000 Professional on the first 10 computers. However, you cannot install Windows 2000 Professional on remaining 40 computers.

正确答案 ：B

Configure the DHCP scope to add additional IP addresses.

解析：解析：Explanation: RIS requires Active Directory, DNS and DHCP. The clients can either be PXE-compliant or they can use a Remote boot diskette. In this scenario, the DHCP server has run out of IP-addresses. By extending the scope by 40 IP addresses the installation on the remaining computers will be successful.

[单选题]You are upgrading computer1 and computer2 from Windows NT Workstation 4.0 to Windows 2000 Professional. You successfully upgrade computer1. During the upgrade of computer2, a series of power outages interrupts the upgrade.You discover that the upgrade of computer2 is incomplete. Furthermore, you find that computer2 can no longer run Windows NT workstation 4.0. Computer2 does not support booting from the Windows 2000 Professional CD-ROM. You decide to use computer1 to help recover the failed upgrade.

正确答案 ：D

On the computer1, run Makebt32.exe from the Bootdisk folder on the Windows 2000 Professional CD-ROM. On computer2, restart the upgrade by using the newly created floppy disks.

解析：解析：Explanation: You can create the four setup boot disks by using either makeboot.exe or makebt32.exe. Both are located in the \Bootdisk directory on the Windows 2000 installation CD. These disks can be used to restart the installation process on computer2.

[单选题]You are the administrator of Ezonexam.com's Windows 2000 network.Your computer is configured to use both Windows 2000 Professional and Windows NT Workstation 4.0 Service Pack 3. Your computer has three hard disks: Disk 0, Disk1, and Disk2. Windows NT Workstation 4.0 is installed on Disk 0. Windows 2000 Professional is installed on Disk1. You want to store your project files on Disk2. You configure Disk2 as a basic volume and format the volume as NTFS in Windows 2000 Professional. You then start Windows NT Workstation 4.0. You find that you cannot access your project files.

正确答案 ：C

Upgrade Windows NT Workstation 4.0 to Service Pack 4 or later.

解析：解析：Explanation: Windows 2000 Professional uses the NTFS 5.0 file system while Windows NT Workstation 4.0 uses the NTFS 4.0 file system. Windows NT Workstation requires Service Pack 4 or later to be able to use the NTFS 5.0 file system.

查看原题 查看所有试题